These precision machined aluminum bobbin spools fit the Norlander Automatic Bobbin. Many fly tiers using a variety of working threads find it economic to simply change spools rather than have a separate bobbin for each thread. These spools will hold from 50 to 500 yards of thread, depending on its size (diameter), it is best not to “overfill them. Winding in a set direction is not critical as the spools can be “turned around” on the bobbin. A marking pen can be used on the side of the spool to identify the thread type or size. A rubber band around the thread on the spool can be used to keep it from unraveling when stored.

• These bobbin spools are the identical with those as part of the “Automatic Bobbin Kit”.
• Bobbin spools are available in a package of three spool or a box of ten spools.

BOBBIN SPOOL ARBOR

The Bobbin Spool Arbor is used for transferring thread from a bulk supply or small wooden & plastic spool onto the aluminum spools used with the Norlander Automatic Bobbin. The arbor can be spun with an electric drill or by hand on the Nor-Vise. Simply push the spool the aluminum bobbin spool onto the Spool Arbor and the “O” ring will hold it in place.

• The Bobbin Spool Arbor is available as a separate item, it is the same as the spool arbor furnished as part of the “Automatic Bobbin Kit”.